Configuration and technical description of each system:

Box structure

1) This oven is composed of chamber, vacuum system, protection system, electrical control system, etc
2) The box is made of mechanical equipment, and the process lines are smooth and beautiful
3) The inner box material is 3mm thick stainless steel brushed plate with polishing treatment to strengthen the shin for reinforcement. The outer carton material is 1.2mm thick cold-rolled steel plate after special surface treatment and electrostatic spraying.
4) The sealing material and unique silicone rubber sealing structure are used between the door and the door frame to seal and resist aging.
5) The vacuum system is composed of domestic vacuum pump, stainless steel vacuum valve, stainless steel connecting pipe and pointer vacuum pressure gauge.
6) The box is equipped with a stainless steel movable sample holder, which is detachable and easy to clean.
7) The tempered and bulletproof double-glazed door observation window on the box door, the glass window is installed in the middle of the box door, which can clearly observe the changes of the internal test items during the test process.

Vacuum system

The studio is an enclosed space connected to a vacuum pump and pressure sensor by a vacuum line. The vacuum pump works continuously to extract the gas in the working room, and the pressure in the working room will be less and less than the standard atmospheric pressure. A hand valve is installed in the vacuum pump prestage, which can manually adjust the pumping volume. This vacuum pump is equipped with an air ballast valve. When the pump is used to pump steam, make sure the gas ballast valve is open.

Technical parameters:

Vacuum level: 133Pa
Volume: 250L
Working room size (mm): 700*600*600
Overall dimension (mm): 1050*760*910
Cargo carrier: 3 pieces

Note: Rotary vane vacuum pump 2XZ-4 is optional (note when ordering). If the viscosity of the material reaches more than 10,000, a high-power vacuum unit must be configured.