Uphold professional integrity, create value for clients, and strive for excellence in the industry.

Focusing on the R&D and production of a series of equipment, including thermostatic drying, vacuum drying, moisture-proof storage, environmental testing, and thermostatic incubation.

Uphold professional integrity, create value for clients, and strive for excellence in the industry.

Focusing on the R&D and production of a series of equipment, including thermostatic drying, vacuum drying, moisture-proof storage, environmental testing, and thermostatic incubation.

Product Details:

Adhere to professional integrity, create customer value, and strive for industry excellence.

90L Vacuum Drying Oven 【BPZ-6090】

Suitable for drying items with high moisture content, the vacuum pump turns on and off regularly to achieve the ideal drying effect by continuous inflation and pumping circulation. Adjustable pumping time, inflation time and number of cycles.

Product Features:

1. The cuboid studio is made of high-quality steel plate or stainless steel plate. The tempered and bulletproof double-layer glass door can observe the objects in the workshop at a glance.
2. The oven door can be adjusted when it closes, and the silicone rubber door is sealed as a whole to ensure a high vacuum in the box.
3. Microcomputer intelligent temperature controller, with dual digital display and PID self-setting function for setting and measuring temperature, accurate and reliable temperature control.
4. The heating power ratio can be adjusted arbitrarily to ensure that the low-end temperature control has no temperature disadvantages.

Vacuum Program Cycle Control:

The overall vacuum drying process control can provide programmed vacuum cycles, just set the vacuum time value, holding time value, and inflation time value according to your requirements, which can further shorten the drying time. For example, control the vacuum cycle through the program, set the vacuum for 10 minutes, hold the pressure for 30 minutes, for 2 minutes for inflation, and the number of cycles is 10 times, and with each cycle, the humidity continues to decrease, and the drying speed is significantly accelerated, and the number of cycles can reach 99 times. It is suitable for drying items with high moisture content。

User usage examples:

Complete machine workflow
Preparation
Turn on the drying oven power
Connect the decompression end of the nitrogen cylinder to the “nitrogen interface” behind the box to adjust the nitrogen inlet pressure
Send the items or specimens that need to be dried into the workshop through the rails and close the box door
Turn on the power and press the start button on the control panel,
(1) Vacuum and heat at the same time
(2) After vacuuming to the set time, the vacuum pump stops working and automatically passes nitrogen gas
(3) Turn off the nitrogen after the nitrogen is passed through to the set time
(4) After holding the state until the set time, the vacuum pump is restarted
(5) After the set time, the vacuum pump and heater will be automatically turned off.
(6) Manual pressure relief

Product Technical Parameters:

Supply Voltage: AC 220V±10%/50Hz±2%
Input power: 3000W
Temperature control range: room temperature +10°C-250°C
Temperature resolution: 0.1°C
Temperature fluctuation: ±0.5°C
Vacuum level: 133Pa
Volume: 90L
Workshop size (mm): 450*450*450
Overall dimension (mm): 615*590*1470
Cargo carrier: 2 pieces
Timing range: 0-9999 minutes
Remarks: This model is a vertical vacuum drying oven, with a working room above and a vacuum pump tool box below. The standard configuration is a rotary vane vacuum pump. The standard liquid water filter can effectively filter out the water vapor extracted from the vacuum box, so as to prevent the water vapor from directly entering the vacuum pump and causing oil spray and affecting the service life of the vacuum pump.