by admin | Mar 2, 2026 | Industry News, News
The core difference between high and low temperature test chambers and constant temperature and humidity chambers is whether they have humidity control functions. High and low temperature test chamber focuses on temperature control and is suitable for single...
by admin | Mar 2, 2026 | Industry News, News
1. How to use Preparation Check whether the box is clean and confirm that the power supply voltage is consistent with the rated voltage of the equipment. The temperature is set according to the sample characteristics (typical room temperature +10°C to 200°C).Check...
by admin | Mar 2, 2026 | Company News, News
Boot Preparation。 Turn on the power and the controller will display the current temperature (such as “InP” or measured value) when powered on Place the items to be dried evenly on the shelves, ensure a spacing of ≥5cm to ensure smooth airflow, and a...
by admin | Mar 2, 2026 | 【Industry customized Oven】, Products
Flow chart of the inner layer of the dry film of the LED aluminum substrate: Substrate pretreatment (degrease/pickling→ washing→ micro-etching/mechanical grinding plates→ washing→dry→ing), peeling PE film→ lamination (preheating→ film→cooling), → exposure→ peeling PET...
by admin | Mar 2, 2026 | 【Industry customized Oven】, Products
1. Test role: The process of testing pollutant release in an environmental chamber can be summarized as follows: placing materials and products or their samples in the test chamber and adjusting environmental conditions such as temperature, relative humidity, and air...
