{"id":2757,"date":"2026-02-28T16:05:54","date_gmt":"2026-02-28T08:05:54","guid":{"rendered":"https:\/\/www.kms-hk.com\/?p=2757"},"modified":"2026-02-28T16:48:54","modified_gmt":"2026-02-28T08:48:54","slug":"__trashed-10","status":"publish","type":"post","link":"https:\/\/www.kms-hk.com\/index.php\/en\/2026\/02\/28\/__trashed-10\/","title":{"rendered":"HS40-HMDS Pretreatment Oven \u3010HS40\u3011"},"content":{"rendered":"
Product Model: HS40<\/h5>\n
Product Features:<\/h5>\n

1. The shell of the machine is treated with cold-rolled plate paint, and the inner liner is made of stainless steel 316L material; The heater is evenly distributed around the outer wall of the inner tank, and there are no electrical accessories or flammable and explosive devices in the inner tank. Tempered, bulletproof double-glazed doors allow you to observe objects in the workshop at a glance.
\n2. The box door closure can be adjusted, and the overall molded silicone rubber door sealing ring ensures a high vacuum degree in the box.
\n3. Microcomputer intelligent temperature controller, with dual digital display and PID self-setting function for setting and measuring temperature, accurate and reliable temperature control.
\n4. The intelligent touch screen control system is equipped with Japan Mitsubishi PLC module, which can be used by users to change the program, temperature, vacuum degree and each program time according to different process conditions.
\n5. HMDS gas closed automatic suction and addition design, the vacuum box has good sealing performance, ensuring that HMDS gas has no leakage concerns.
\n6. The whole system is made of materials, no dusty materials, and is suitable for 100-level lithography room purification environment.<\/p>\n

Product Technical Parameters:<\/h5>\n

Supply Voltage: AC 220V\u00b110%\/50Hz\u00b12%
\nInput power: 3000W
\nTemperature control range: room temperature +10\u00b0C-250\u00b0C
\nTemperature resolution: 0.1\u00b0C
\nTemperature fluctuation: \u00b10.5\u00b0C
\nVacuum level: 133Pa
\nVolume: 90L
\nWorkshop size (mm): 450*450*450
\nOverall dimension (mm): 615*615*900
\nCargo carrier: 2 pieces Time unit: minutes
\nOptions:
\nVacuum pump: German brand, Laibao “DC” bipolar series rotary vane oil pump, high ultimate vacuum, low noise, stable operation.
\nConnecting tube: stainless steel bellows, completely sealed to connect the vacuum pump with the oven.<\/p>\n

The necessity of an HMDS pretreatment system: \u00a0<\/strong><\/h5>\n

In the semiconductor production process, lithography is an important process link in the transfer of integrated circuit graphics, and the quality of gluing directly affects the quality of lithography, and the gluing process is also particularly important. The vast majority of photoresists in the photoresist coating process are hydrophobic, while the hydroxyl groups and residual water molecules on the surface of the silicon wafer are hydrophilic, which causes poor adhesion between the photoresist and the silicon wafer, especially the positive glue, the developer will invade the connection between the photoresist and the silicon wafer during development, which is easy to cause drift strips, floats, etc., resulting in the failure of lithography pattern transfer, and wet corrosion is prone to lateral corrosion. The viscosity enhancer HMDS (hexamethyldisilazane) can improve this condition well. After applying HMDS to the surface of the silicon wafer, it can react with siloxane as the main body compound by heating it in an oven. It successfully changes the surface of the silicon wafer from hydrophilic to hydrophobic, and its hydrophobic group binds well to the photoresist and acts as a coupling agent.<\/p>\n

Principle: \u00a0<\/strong><\/h5>\n

The HMDS pretreatment system can evenly coat a layer of HMDS on the surface of the silicon wafer and substrate by the working temperature, processing time, holding time and other parameters of the HMDS pretreatment process of the oven, which reduces the contact angle of the silicon wafer after HMDS treatment, reduces the amount of photoresist, and improves the adhesion between the photoresist and the silicon wafer.
\nGeneral workflow of HMDS vacuum oven:
\nDetermine the oven operating temperature first.<\/p>\n

Typical pretreatment procedures are:<\/h5>\n

After the vacuum level reaches a certain high vacuum level, it begins to fill with human nitrogen, and after it reaches a certain low vacuum level, the process of vacuuming and filling nitrogen gas is carried out again, and after reaching the set number of nitrogen fillings, it begins to be maintained for a period of time, so that the silicon wafer is fully heated and the moisture on the surface of the silicon wafer is reduced. Then start vacuuming again, fill HMDS gas, and after reaching the set time, stop filling the HMDS chemical liquid and enter the holding stage to make the silicon wafer fully react with HMDS. When the set holding time is reached, start vacuuming again. Fill in nitrogen to complete the whole operation process.<\/p>\n

Reaction mechanism between HMDS and silicon wafer:<\/h5>\n

First, heat to 100\u00b0C-200\u00b0C to remove the moisture on the surface of the silicon wafer, and then HMDS reacts with the OH on the surface to form silicon ether on the surface of the silicon wafer, eliminating hydrogen bonding, so that the polar surface becomes a non-polar surface. The entire reaction continues until steric hindrance (the trimethylsilyl group is larger) prevents it from reacting further. Exhaust emissions, etc.: Excess HMDS vapour (exhaust gas) will be pumped out by a vacuum pump and discharged to a dedicated exhaust gas collection pipe. Special treatment is required when there is no special exhaust gas collection pipeline.<\/p>\n

Shell cold-rolled plate baking paint<\/strong>
\n\"\"\u00a0\u00a0\u00a0\u00a0 \"\"<\/p>\n

The housing is made of stainless steel<\/p>\n

\"\"\"\"<\/p>\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

HS40 In the semiconductor production process, lithography is an important process link for the transfer of integrated circuit graphics, and the quality of gluing directly affects the quality of lithography, and the gluing process is also particularly important. The vast majority of photoresists in the photoresist coating process are hydrophobic, while the hydroxyl groups and residual water molecules on the surface of the silicon wafer are hydrophilic, which causes poor adhesion between the photoresist and the silicon wafer, especially the positive glue, the developer will invade the connection between the photoresist and the silicon wafer during development, which is easy to cause drift strips, floats, etc., resulting in the failure of lithography pattern transfer, and wet corrosion is prone to lateral corrosion. The viscosity enhancer HMDS (hexamethyldisilazane) can improve this condition well<\/p>\n","protected":false},"author":1,"featured_media":1738,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[170,86],"tags":[],"class_list":["post-2757","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-customized-drying-oven","category-products2"],"_links":{"self":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts\/2757","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/comments?post=2757"}],"version-history":[{"count":3,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts\/2757\/revisions"}],"predecessor-version":[{"id":2803,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts\/2757\/revisions\/2803"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/media\/1738"}],"wp:attachment":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/media?parent=2757"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/categories?post=2757"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/tags?post=2757"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}