1. The cuboid studio is made of high-quality steel plate or stainless steel plate. The tempered and bulletproof double-layer glass door can observe the objects in the workshop at a glance.
\n2. The closing tightness of the vacuum oven door can be adjusted, and the silicone rubber door is sealed as a whole to ensure the high vacuum degree in the box.
\n3. Microcomputer intelligent temperature controller, with dual digital display and PID self-setting function for setting and measuring temperature, accurate and reliable temperature control.
\n4. The heating power ratio can be adjusted arbitrarily to ensure that the low-end temperature control has no temperature disadvantages.<\/p>\n
The overall vacuum drying process control can provide a programmed vacuum cycle, and the pumping time value, holding time value, and filling time value can be set according to your requirements, which can further shorten the drying time. For example, the vacuum cycle is controlled by the program, the vacuum is set for 10 minutes, the pressure is held for 30 minutes, the inflation is 2 minutes, and the number of cycles is 10 times, and the humidity is continuously reduced with each cycle, and the drying speed is significantly accelerated, and the number of cycles can reach 99 times. Suitable for drying items with high moisture content.<\/p>\n
Complete machine workflow
\nPreparation
\nTurn on the drying oven power
\nConnect the decompression end of the nitrogen cylinder to the “nitrogen interface” behind the box to adjust the nitrogen inlet pressure
\nSend the items or specimens that need to be dried into the workshop through the rails and close the box door
\nTurn on the power and press the start button on the control panel,
\n(1) Vacuum and heat at the same time
\n(2) After vacuuming to the set time, the vacuum pump stops working and automatically passes nitrogen gas
\n(3) Turn off the nitrogen after the nitrogen is passed through to the set time
\n(4) After holding the state until the set time, the vacuum pump is restarted
\n(5) After the set time, the vacuum pump and heater will be automatically turned off.
\n(6) Manual pressure relief<\/p>\n
Supply Voltage: AC 220V\u00b110%\/50Hz\u00b12%
\nInput power: 2000W
\nTemperature control range: room temperature +10\u00b0C-250\u00b0C
\nTemperature resolution: 0.1\u00b0C
\nTemperature fluctuation: \u00b10.5\u00b0C
\nVacuum level: 133Pa
\nVolume: 50L
\nWorking room size (mm): 415*345*370
\nOverall dimension (mm): 720*525*1235
\nCargo carrier: 2 pieces
\nTiming range: 0-9999 minutes
\nRemarks: This model is a vertical vacuum drying oven, with a working chamber above and a vacuum pump toolbox below. The standard configuration is a rotary vane vacuum pump. The standard configuration is a liquid water filter, which can effectively filter out the water vapor extracted from the vacuum box, so as to prevent the water vapor from directly entering the vacuum pump and causing oil spraying and affecting the service life of the vacuum pump.<\/p>\n","protected":false},"excerpt":{"rendered":"
Suitable for drying items with high moisture content, the vacuum pump turns on and off regularly to achieve the ideal drying effect by continuous inflation and pumping circulation. Pumping time, inflation time and number of cycles are adjustable.<\/p>\n","protected":false},"author":1,"featured_media":1747,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[170,86],"tags":[],"class_list":["post-2765","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-customized-drying-oven","category-products2"],"_links":{"self":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts\/2765","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/comments?post=2765"}],"version-history":[{"count":3,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts\/2765\/revisions"}],"predecessor-version":[{"id":2811,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/posts\/2765\/revisions\/2811"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/media\/1747"}],"wp:attachment":[{"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/media?parent=2765"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/categories?post=2765"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kms-hk.com\/index.php\/wp-json\/wp\/v2\/tags?post=2765"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}